اخي العزيز يجب تحميل السوفت وير الجديد لجهازك وستفتح جميع القنوات الليت انقطعت لديك

حيث لن ينفع اضافة الكود الجديد فقط

اذا كانت لديك المعرفه في انزال السوفت وير سأعديك اخر سوفت وير بس يا ريت لو تخبرني شو موديل جهازك

في انواع كثيره من مايكرو اكس شوف رقمه كم

وهذي طريقة ادخال الشفرات وتحديث الجهاز

Special Codes used to activate key code menu for MIcro-x 2800 - 6000 IR and 6500 IR

1.To initially activate the key code menu -- one time usage only


Go to the language setting press <ok> on the remote - highlight <english.
press <red> key on remote control - followed by 8888

one additional line will be added -EMULATION ---- you need to "enable" this feature to access the code menu. this is a one time activation - please note that incase you download new software - by default the EMULATION is set at "disable"

this feature also can be used as parental control to de -activate the code menu -



2. To access the key code editing menu --- can be used any time

Go to the language setting press <ok> on the remote - highlight <english.
press 9999 on the remote -- the key code menu will appear

enable the emulation on ----


3. for receiver to receiver transfer for software.

Connect slave receiver to the master using a twisted RS-232 cable ( humax or Echostar download cable)

on the master receiver connected to the televsion

go to "config" in the menu screen then press <ok> --- select system inforamtion then press on the remote --- 9999

select "program code download" press okay

the transfer progress bar will appear on the screen.


on completion 100 % disconnect transfer cable and wait for the message 0000 to appear on the slave receiver --- very important information or the receiver will mal-function ---


GO TO THE KEY CODE MENU AND PRESS YEL


وهنا موقع الجهاز وستجد اخر تحديث له مع اللودر الخاص بتحميل السوفت وير على الجهاز

astrovox.biz/Listing_Products.aspx?BD_ID=3&tName=Products