الاير ديتو ببلاش (الموضوع بالإنجليزي)

    تمر دردشة الساحة الخاصة بالمتصفح والموبايل بفترة صيانة دورية هذا ونعتذر للجميع على الإنقطاع المؤقت بإمكانكم المشاركة في المنتدى لحين عودتها :)

    • الاير ديتو ببلاش (الموضوع بالإنجليزي)

      I have been using the FREECAM without any trouble as you described in
      your message shown below only for IRDETO channles.

      Lately I have updated my CAM to FREECAM 2-017 and found an
      interesting website at irdeto.net/PMK-Deluxe/ which is
      providing FREECAM codes for IRDETO, SECA and VIACCESS. The problem
      here is that SECA has only 24 digits (example 0345 3262 3183 1740
      2399 0237) and my FREECAM2 accepts 30 digits only.

      How can I use my FREECAM2 to see SECA and VIACCESS using freecam
      codes (without goldcard) as I am successfully doing with IRDETO????

      Looking forward to your reply.


      --- In cods2002@y..., Mohammed Almutairi <mohd_rw@y... wrote:

      ---------------------------------------------------------------------------------
      ------------
      Upgrade your Irdeto CAM to be used to view channels with NO CARDS.

      Requirements:

      1- A notebook copmputer with PCMCI is required to upgrade the CAM.
      Windows95 and Windows98 (final revision) will work fine. Windows2000
      and Windows98 (first edition) have difficulties accepting the upgrade
      software.


      ============================================
      Upgrade procedure:

      1- According to the Windows version you are using (Win95 or
      Win98 ), copy the file "Irdeto95.inf" or "Irdeto98.inf" to the folder
      \WINDOWSINF

      2- Copy the files "CiPhysical.dll" AND "ird106.ini" to \WINDOWS

      3- Make sure that the Irdeto CAM is inside the PCMCI and is
      detected by the copmputer (a small icon is normally with a CAM
      picture is shown in Systray).

      3- Start the program "ird106.exe". The program window will
      be "blue".

      4- Click "START" and observe the progress bar moving. The upgrade
      takes about a minute. At the end of the upgrade, the program window
      will become "green".

      ============================================
      Preparation of codes for the CAM:

      Now insert the CAM into the receiver CI slot and program it with
      any Plain Key as follows:

      Suppose the Plain Key wanted is:
      PK=8F2E65F483022B70 (Key0A) for Provider00

      First arrange them to be:
      Prov - KeyIndex - PlainKey
      00---- 0A ------- 8F-2E-65-F4-83-02-2B-70

      Now convert all the bytes from Hex to Decimal with any calculator.
      The result will be:

      0-10-143-46-101-244-131-2-43-112

      The last step is to make all the numbers consist of 3 digits. The
      result is:

      000-010-143-046-101-244-131-002-043-112

      This code is now ready to be loaded into the CAM.

      ============================================
      Loading of codes into the CAM:

      1- Form the receiver menu, select "Irdeto Free".
      Some receivers will require access to "Commom Interface" then
      select "Irdeto Free".

      2- Select "Key board".

      3- Select "Enter new plainkey".

      4- Type the code prepered above using the remote control:
      000-010-143-046-101-244-131-002-043-112
      Only numbers are to be typed (ignore the dash).

      5- At the end of typing, another window will appear. Select "YES,
      save key".

      6- Now the channels are opened and free to be watched.


      ¨°o.O ( على كف القدر نمشي ولا ندري عن المكتوب ) O.o°¨
      ---
      أتمنى لكم إقامة طيبة في الساحة العمانية

      وأدعوكم للإستفادة بمقالات متقدمة في مجال التقنية والأمن الإلكتروني
      رابط مباشر للمقالات هنا. ومن لديه الرغبة بتعلم البرمجة بلغات مختلفة أعرض لكم بعض
      المشاريع التي برمجتها مفتوحة المصدر ومجانا للجميع من هنا. تجدون أيضا بعض البرامج المجانية التي قمت بتطويرها بذات الموقع ..
      والكثير من أسرار التقنية في عالمي الثاني
      Eagle Eye Digital Solutions